Tag Archive for: giardina

New Giardina Full Spray Line Installed

A well-known UK  manufacturer of wooden and timber components has taken delivery of a custom Giardina spray and drying line from Schuberts.

 

 

 

 

 

 

 

 

 

 

 

 

All of the production trials were carried out at the Schuberts Test Centre near Sheffield to define correct film weights, flash-off times, drying temperatures and energy required. The coating is a special knot-blocking, 100% waterbased coating, so drying was key to the process.

 

 

 

 

 

 

 

 

 

 

 

 

Double, quick change circuits are fitted to the Giardina spray machine, with Wagner pumps and GA4000 auto guns, meaning rapid colour changes, flushes and consistent film weights applied.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The drying tunnel allows for adjustable flash-off length, controllable jetted air from a hot water feed and infra-red from 0% to 100%.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Email sales@schuberts.co.uk for more information on Giardina Finishing spray lines and drying systems.

Giardina Group Showcase In 4 Minutes

Giardina Group, one of Schuberts key working partners have showcased their finishing business in the below video.

Available in the UK and Ireland, Schuberts supply Giardina equipment for finishing timber, engineered board, GRP, PVC, glass and composites.

These can be roller coating, vacuum coaters, profile spray, panel spray, sanding, brushing, UV coating and all types of drying tunnels and ovens.

 




UK Timber Manufacturer Goes The Giardina Profile Finishing Route

A leading, high-end, manufacturer of the finest range of sash windows, casement windows and doors has just installed a new Giardina profile sanding and automatic spray line for their production and to add to the existing hanging spray shop, flash-off and Schubox system from Schuberts.

 

 

 

 

 

 

 

 

 

 

 

 

 

The 4 head sanding machine is fully adjustable from beading to window board, fitted with Flex-Trim heads and brushes, meaning a perfect sand every time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The spray machine is fitted with 3 Wagner GA4000 guns and applies a perfect coat of waterbased coatings to each and every profile.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once taken off the line, the products are racked on trolleys and put inside the Schubox CIR system for a proper drying process at 38c for 45 mins.

 

 

 

For more information, email sales@schuberts.co.uk

GB Projects Invests In A New Finishing System

GB Projects trusted Schuberts with a new, custom-built finishing system for both solvent and waterbased coatings.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The new system comprises of both manual spray and automatic spray applications, feeding into a flash-off section and then finally into a Schubox CIR gas catalytic infrared drying system.

Product arrives at the finishing shop from manufacturing either in panel or carcass form. For long finishing runs such as priming, they use an automatic spray machine. When top coats or carcass work needs coating they use the manual spray shop enclosure.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Both the auto machine and manual spray shop both feed into a large flash-off room. The former through a slot in the side of the flash-off and the latter through double sliding product doors.

The flash-off is fitted with low level balanced extraction with adjustable louvers, through an atex fan, into ducting and finally into the Schubox.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once flashed-off for between 10-15 mins, either the finger trolleys or carts are wheeled into the Schubox for rapid curing. For solvent coatings, this takes 20 mins and for water based coatings 25-30 mins. The system will accept multiple racks, with a mixture of coatings, film weights and substrates at any one time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Director of GB, Eddy Burrows says; “Schuberts went above and beyond to provide us with a system that fitted perfectly. It’s rare to find a company that will not just supply the bare minimum but also go the extra mile and Schuberts do exactly that. Their team provided a brilliant service from start to finish.”

 

For more information on how Schuberts can transform you finishing process, email sales@schuberts.co.uk

 

Schuberts Re-Investing In The Future Of Finishing With Giardina Group

As part of the continual growth and advancement in the UK, Schuberts have yet again re-invested in the latest finishing technology. Schuberts are the ONLY manufacturer and supplier of finishing equipment in the UK with a production-spec Test Centre, Lab and Training Facility.

This month, we Schuberts the delivery and installation of the new Giardina Dualtech 420, fully automatic through-feed spray machine system. This machine is suitable for wood, metal, plastics, glass, composites and many other industries. It will accept 1k waterbased, 1k solvent based, 2k waterbased, 2k solvent based and lots of other sprayable coatings.

 

 

 

 

 

 

 

 

 

 

 

 

Capable of running up to 8m/min, it boasts multiple wet spray circuits, 8 Wagner GA400 guns, full self-cleaning paint recovery belt and a whole host of other features that set it aside from the normal competition. With inverter driven fans the system can be tailored to the customers exact requirements. Made ready for Industry 4.0, the Giardina machine is prepared for the future!

 

 

 

 

 

 

 

 

 

 

 

All Dualtech spray machines have in common is the top quality of key technical features, including two opposing painting arms and a large cabin which guarantees an optimal application on both the panel’s surface and edges.
Other noteworthy features are the technology to recover paint from the conveyor belt and the latter’s cleaning system, unequalled solutions in terms of extremely low washing solvent consumption, a longer belt service life and a very simple operation.

 

 

 

 

 

 

 

 

 

 

 

All Dualtech machines can be fitted with accessories and technological solutions to further increase their flexibility, productivity and reliability. This includes the “Dualfast”, the system that allows you to change guns – and hence the spraying circuit – in less than 60 seconds, thereby maintaining optimal working conditions; the option of the PLC controlled vertical positioning system of the guns also guarantees excellent painting cycle repeatability; the electronic control for the ventilation inside the spray chamber which is required for extending the efficiency and operating time of the spray machine. All versions are available with a “Dry” or “Wet” solid particulate disposal system.

 

 

 

 

 

 

 

 

 

 

Giardina Dualtech 420 brochure Dualtech 420_GB Brochure

 

For more information, email sales@schuberts.co.uk

 

 

 

Component Flow Coating Line For Joinery

New flow-coating profile line for waterbased preservatives has been installed at a UK joinery manufacturer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This profile coating line is capable of processing beading all the way through to large timber sections. The waterbased coating is applied through a series of directional low pressure nozzles. Any over spray is collected, filtered and put back into the system, so there is zero liquid wasted in the system. All the internals of the machine are moplan and teflon coated.

All of the parameters can be controlled on the HMI screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once coated, the timber is subjected to a series of adjustable air jets that blow the excess coating off but leaves the timber damp. This is key to allow the preservative to soak into the timber for 10 minutes after application.

 

The timber is removed from the end of the line, placed on drying racks and dried properly using gas catalytic infra red technology.

 

For more information email sales@schuberts.co.uk

New And Old At Virtuoso

Schuberts have just installed a turn-key Giardina autospray line at Virtuoso Doors as well as their older manual finishing system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The philosophy of the new line was borne out of extensive testing and trials at our Sheffield Test Centre and proved to the customer there was only one solution that would work.

 

A cantilevered loading table at the start of the line starts the process, followed by infeed conveyor and then mechanical brushing with the brilliant flex-trim systems. The brushing machine has oscillation, speed, direction and height controls as well as a vacuum bed. This ensures the best surface preparation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After brush sanding, there is an open section to allow application of prep-clean liquid before the cleaning and de-ionising process.

 

The spray machine 420 dry is fitted with 2 circuits and Wagner pumps and guns to give a consistent and even coverage of the coatings. This machine is processing full size doors as well as components.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once sprayed, the products enter a flash-off tunnel, with incoming air is filtered, the air warmed to 30c and the paint vapours extracted to atmosphere.

 

After the flash-off, the products go through a jetted air tunnel at 45-50c for drying.

 

This new Giardina line from Schuberts goes hand in hand with the original manual system consisting of sprayshop enclosure with full autobalance, flash-off, Schubox drying system and paint mixing room.

 

 

 

 

 

 

 

 

 

 

Giardina MSL Lines

The automatic tray system has been designed and built to optimize the painting and drying of doors, panels and profiles. This system combines the manual painting cycle with the drying cycle, eliminating the need to handle the parts during the various phases.

The Giardina Manual Spray Line can be configured and sized according to the process needs and the expected productivity.

 




For more information, email sales@schuberts.co.uk

New Automatic Spray Line Installed For UV Coatings On Kitchen Panels

A large UK manufacturer of kitchens and components has taken delivery of a new fully automatic spray line from Schuberts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


•Infeed conveyor for batch loading.
•Cleaning and deionising machine.
•Fully automatic spray machine.
•GPM multi level oven.
•UV curing tunnel.
•Outfeed conveyor and inspection zone.

 

For more information on automatic spray machines and coating lines, email sales@schuberts.co.uk

New 420 Automatic Spray Machine Launched

Schuberts presents the Giardina “Dualtech 420”, the first stage of the renovation process that will affect the entire range of “Dualtech” automatic through-fee spraying machines, a technology that represents fifty years of experience in spray painting in the name of quality, reliability, flexibility and ease of use.


Among the most interesting technical features the two opposing painting arms that guarantee an optimal application both on the surface and on the edges of the panel and the technology for the recovery of the paint that falls on the conveyor belt and the cleaning system of the latter, solutions that have no equal in terms of very low consumption of the cleaning solvent, a longer life of the belt, and a high simplicity of operation.


Each machine in the “Dualtech” range can be equipped with accessories and technological solutions to further increase flexibility, productivity, and reliability, such as the quick gun exchange system “Dualfast”, which allows you to change guns – and consequently the spraying cycle – in less than 60 seconds or the automatic vertical positioning system of the guns, or the electronic control of the ventilation inside the spray chamber, perfect for extending the efficiency and operating time of the sprayer.

 

For more information, email sales@schuberts.co.uk