Schuberts Re-Investing In The Future Of Finishing With Giardina Group

As part of the continual growth and advancement in the UK, Schuberts have yet again re-invested in the latest finishing technology. Schuberts are the ONLY manufacturer and supplier of finishing equipment in the UK with a production-spec Test Centre, Lab and Training Facility.

This month, we Schuberts the delivery and installation of the new Giardina Dualtech 420, fully automatic through-feed spray machine system. This machine is suitable for wood, metal, plastics, glass, composites and many other industries. It will accept 1k waterbased, 1k solvent based, 2k waterbased, 2k solvent based and lots of other sprayable coatings.

 

 

 

 

 

 

 

 

 

 

 

 

Capable of running up to 8m/min, it boasts multiple wet spray circuits, 8 Wagner GA400 guns, full self-cleaning paint recovery belt and a whole host of other features that set it aside from the normal competition. With inverter driven fans the system can be tailored to the customers exact requirements. Made ready for Industry 4.0, the Giardina machine is prepared for the future!

 

 

 

 

 

 

 

 

 

 

 

All Dualtech spray machines have in common is the top quality of key technical features, including two opposing painting arms and a large cabin which guarantees an optimal application on both the panel’s surface and edges.
Other noteworthy features are the technology to recover paint from the conveyor belt and the latter’s cleaning system, unequalled solutions in terms of extremely low washing solvent consumption, a longer belt service life and a very simple operation.

 

 

 

 

 

 

 

 

 

 

 

All Dualtech machines can be fitted with accessories and technological solutions to further increase their flexibility, productivity and reliability. This includes the “Dualfast”, the system that allows you to change guns – and hence the spraying circuit – in less than 60 seconds, thereby maintaining optimal working conditions; the option of the PLC controlled vertical positioning system of the guns also guarantees excellent painting cycle repeatability; the electronic control for the ventilation inside the spray chamber which is required for extending the efficiency and operating time of the spray machine. All versions are available with a “Dry” or “Wet” solid particulate disposal system.

 

 

 

 

 

 

 

 

 

 

Giardina Dualtech 420 brochure Dualtech 420_GB Brochure

 

For more information, email sales@schuberts.co.uk

 

 

 

New Giardina Auto-Spray Line Installed For A Very Special Use

One of the worlds largest manufacturers of engineered sealing solutions has taken delivery of a custom width Giardina coating line from Schuberts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Built to a working width of 1500mm, this line sprays a very accurate layer of product, recovers all the overspray, to be filtered and used again and then dried inside an inline drying tunnel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The automatic belt cleaning system on the spray machine means that all overspray is recovered. It then passes through filters and back into a constant mixing stainless steel tank, before being dosed back into the machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The automatic guns are positioned inline and fitted with very accurate nozzles and the machine has the ability to control flow, pressure and therefore build-up of coating.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once sprayed, the product goes into a high speed jetted air oven, connected to in-line waterheaters and heat exchanges so the oven can run at a steady 70-80c irrespective of the factory temperature.

 

Running at 6m/min, this really is a special fully automatic Giardina spray line supplied by Schuberts!

Yorke Towne, Toronto, Test Centre Sees Additional Install

 

 

 

 

 

 

 

Yorke Towne Supplies Ltd, Schuberts’ sole agents for Ontario, Canada have just taken delivery of the next phase of the new production-spec Test Centre.

 

 

 

 

 

 

 

 

 

 

 

 

 

The fully integrated ATEX CSA system features a manual smart booth spray system. This constantly monitors and automatically adapts the airflow and pressure differential inside the spray zone, keeping dust out, vapours inside and overspray drawn into the extraction filters. The system makes up for doors being opened, quality and saturation of the filtration system and changes in factory pressures (dust extraction, loading bay doors etc)

 

 

 

 

 

 

 

 

 

 

 

 

A flash-off section connects directly to the spray enclosure and allows coated product to flow out, settle and vent before going into the Schubox for rapid drying. The flash-off features filtered air input and low level extraction, again with 1000 lux lighting sets.

The Schubox completes the Test Centre, allowing either solvent or water based coatings for wood, glass, PVC, GRP and composites to be rapidly dried, at low temperature in record time. Utilising CSA and ATEX approved gas catalytic log wave infra red emitters, the Schubox can run from 30c to 50c and in combination with BA stainless, fireproof carcass, filtered air input and a unique recirculating airflow inside the Schubox.

For more information and to run trials in the Yorke Towne Canadian Test Centre, email scesario@yorketowne.com or call +1 905-762-1200